Dear Reader, please subscribe to the pc month RSS feed.

I have DSL internet conenction and have Linksys AG241 DSL Router. I have one public IP address assigned to me on my DSL account from ISP.
in router i have defined port forwarding for accessing one PC remotely,also IP address of PC is specified in router, the port defined is 3389 which is the port for remote access. this PC is having private IP 192.168.0.11, now when i enter my public IP from my home using windows remote access I am able to reach to my PC in office. this is fine

when i specified another private for another PC in my office, i again specified the same 3389 port for remote access, now this time when i tried to access my 2nd PC I could not but yes i still can access my first PC with address 192.168.0.11, I would like to know why it is like that, is it possible to define more then one PC in router port forwarding for remote access so that in case i need to access other PC i can do that or there is limitation that with one Public address i can only access PC?

Share This

Model is GE PRO-HTProblem
I have aperfectly normal working pc,i wanted to add
more memory to it,and stupudily i added sd ram to the
ddr ram thatn was already in there.So when starting up
the pc,the pc only recognised the sd ram,and not the
ddr ram,i took out the sd ram and put the ddr ram back
in,did not work,put back the sd ram it works.Went on
the net to get help,someone gave me these steps.Take
out sd ram after switching off the pc.Switch the pc
on,and then back off,then put in the ddr ram,switch
back on,does not work,switch off put back sd ram,oh my
god now that does not work.So now my pc makes 3 beeps
at a time.What can i do to make the pc work again? I
have took out the battery,and jumpers some told me to
do,but all i am getting is beeps.I have also reset thecmos by touching the 2 metals with a hairpin.Is there any order i should be doing this,becasue an it guy told me to take out the sd ram and switch the pc on blank,at least that worked,now nothing works.

Share This

hi i just bought new RAM for my pc my pc model is Packard Bell IMEDIA 1402 and i bought a new stick of 1gb RAM !!! when i put the RAM in it fitted great!!! so now i have 2 sticks of RAM in my PC but when i started my pc up it will beep constantly!!! untill i pull the plug out please help!!! SOS

i even tryed the pc with the old ram and without the new RAM and it still wont start up!!! ohh yeah i use windows xp home edition!
well my original ram says> Manafacturer> Infineon 256mb DDR PC3200, CL3 and my new RAM says> Manafacturer> Emartbuy, 1GB DDR DIMM pc3200 and they are both i think 184 pin!!!

i also tryed it with the old 1 only in AND only the new one in it still beeps and it also before it beeps it makes a noise as if the pc cant start up but its trying to!
the beeps are continusely my mom counted 50 but they were still going on untill we pulled the pc plug out and the monitor just says no signal!the beeps are short
and the 1st time i turned the pc on after inseting the new RAM i smelled some burning but that dosnt happen anymore plzplz help!!!

Share This