Dear Reader, please subscribe to the pc month RSS feed.

Model is GE PRO-HTProblem
I have aperfectly normal working pc,i wanted to add
more memory to it,and stupudily i added sd ram to the
ddr ram thatn was already in there.So when starting up
the pc,the pc only recognised the sd ram,and not the
ddr ram,i took out the sd ram and put the ddr ram back
in,did not work,put back the sd ram it works.Went on
the net to get help,someone gave me these steps.Take
out sd ram after switching off the pc.Switch the pc
on,and then back off,then put in the ddr ram,switch
back on,does not work,switch off put back sd ram,oh my
god now that does not work.So now my pc makes 3 beeps
at a time.What can i do to make the pc work again? I
have took out the battery,and jumpers some told me to
do,but all i am getting is beeps.I have also reset thecmos by touching the 2 metals with a hairpin.Is there any order i should be doing this,becasue an it guy told me to take out the sd ram and switch the pc on blank,at least that worked,now nothing works.

Share This

My home PC shut off and will not come back on.?
I was on my PC and it just went dead. I have an HP Pavilion not more than 3 years old. There is a small green light on the back of the PC that is flashing, but when I press the power button nothing happens.

There was a thunder and lightning storm in my area when I was using the PC. I have the PC and all other equipment plugged into a surge protector. Everything else that is plugged into the surge protector is working but the PC is not. I unplugged the PC from the surge protector and plugged it directly into the wall outlet but it still doesn’t work.
What is that little green flashing light in the back?
Is there ANYTHING I can do to get my PC running again?

Pleeeease help.

Share This

hi i just bought new RAM for my pc my pc model is Packard Bell IMEDIA 1402 and i bought a new stick of 1gb RAM !!! when i put the RAM in it fitted great!!! so now i have 2 sticks of RAM in my PC but when i started my pc up it will beep constantly!!! untill i pull the plug out please help!!! SOS

i even tryed the pc with the old ram and without the new RAM and it still wont start up!!! ohh yeah i use windows xp home edition!
well my original ram says> Manafacturer> Infineon 256mb DDR PC3200, CL3 and my new RAM says> Manafacturer> Emartbuy, 1GB DDR DIMM pc3200 and they are both i think 184 pin!!!

i also tryed it with the old 1 only in AND only the new one in it still beeps and it also before it beeps it makes a noise as if the pc cant start up but its trying to!
the beeps are continusely my mom counted 50 but they were still going on untill we pulled the pc plug out and the monitor just says no signal!the beeps are short
and the 1st time i turned the pc on after inseting the new RAM i smelled some burning but that dosnt happen anymore plzplz help!!!

Share This